Dual wire myograph system 420A & 520A

Dual wire myograph system 420A & 520A

Manufacturer: 

The Dual Wire Myograph Systems allow simultaneous, independent testing of two vessels with diameters of 30 μm to 3 mm. The vessels are mounted as ring preparations by threading them over two parallel stainless steel wires and securing the wires to two supports or "jaws".

Add to quote request
  • Description

Dual wire myograph system 420A & 520A

FEATURES & BENEFITS

  • Manually (420A) or automatically (520A) operated micropositioners for accurate tension control ​
  • Chamber can be easily divided to keep 2 mounted samples separate​
  • Glass windows in chamber base facilitates morphological or fluorescence measurements 
  • Digital output. Data directly piped into Labchart Pro

The Dual Wire Myograph Systems allow simultaneous, independent testing of two vessels with diameters of 30 μm to 3 mm. The vessels are mounted as ring preparations by threading them over two parallel stainless steel wires and securing the wires to two supports or "jaws".

On the 420A Dual Wire Myograph System one support is attached to a precision micrometer, allowing manual control of vessel circumference and stretch. On the 520A the support is attached to a linear, motor-driven micrometer, allowing automated control of vessel circumference and stretch. The other support on both the 420A and the 520A is attached to a force transducer for measurements of force/tension development.

The preparation is mounted in a heated, 10 ml acid-resistant stainless steel chamber, which can be covered by a lid with ports for rapid suction/draining, refilling and oxygen supply.

The chamber can be divided for independent testing of each vessel. Glass windows in the base of the chamber allow morphological observations or fluorescence measurements on an inverted microscope to be made. Typically, the preparation is maintained in the heated chamber in a physiological salt solution at 37°C and bubbled with oxygen. Under these conditions, the vessels remain viable for at least 12 hours.
 
The two vessels can also be mounted in one common chamber by removing the divider. The vessels are thus exposed to identical conditions, such as the concentration of the compound of interest. This allows direct comparative studies of two vessels from treated/untreated conditions or patient samples e.g. diseased vs. healthy. It is thus possible to examine whether a given pathological state is associated with altered morphology or reactivity to endogenous compounds. It is also possible to examine whether drugs are able to normalize vessel reactivity.

Following mounting and equilibration, the passive length-tension relationships of the vessels are determined, the so-called normalization. During the actual experiments, the circumferences of the vessels are kept constant, i.e. the vessels are examined under isometric conditions. Compounds are added directly to the chamber and vessel tension is monitored for possible contractile or relaxing effects.The new updated Wire Interface with the finger touch screen makes it easy to setup and use. Furthermore, the new Wire Interface is prepared for the DMT Device Enabler allowing Automatic recognition of supported devices by LabChart, use of multiple devices simultaneously, correct units and ranges in LabChart channels and simultaneous recording of data into LabChart alongside a PowerLab. The DMT Device Enabler allows the Wire Myograph - 420A and 520A to stream data directly into LabChart without a Powerlab box.