Ortoalresa

Consul 22 centrifuge series, refrigerated and ventilated models

Code CE 226

A great centrifuge, compact, high capacity and with the advantages of equipment in superior segments. The type of control provided, through its TFT colour touch screen, provides the user with features that enable, in addition to the control of the equipment by operating parameters, the possibility to export the data for subsequent analysis and future operation programming. The autonomy provided by this equipment enables the user to optimise working time in the lab, by automation of cycles and modes of operation. These features also ensure process traceability and that no parameter is uncontrolled. The same as the rest of Ortoalresa centrifuges, it is designed to be versatile, therefore it has swing out rotors with volumes of 400 ml. per bucket, rotors for microplates 80 mm height, angle fixed rotors for high speed and microtubes as well as a wide range of adaptors for all of them. The system of the refrigerated model allows it to maintain the minimum temperature of the chamber below 4°C regardless of the type of rotor and the speed selected.

Read more about product

Get quote Tell a colleague

See other products in applications

Laboratory equipment Preparation of cell culture for imaging Centrifuges, cell separation

Features

TFT color touch screen, visible from more than 3 m

Shows RPM and RCF, time, temperature, acceleration/deceleration values (PCBS) and unbalance location system (ULS)
Speed programming in 10 RPM/10 xg steps
Real RCF values on screen based on accessories configuration
Count up/down from “0” or at “set RPM/RCF” for reproducible tests
Timer from 1 sec to 99 hours programmable in 1 sec. steps and hold position
PCBS: Progressive controlled acceleration and braking system up to 175 selectable ramps that prevents sample homogenization after separation.
ULS: Unbalance location system indicating on the screen the number of the bucket which produces the unbalance switch off
Start delay: To program the time at which the cycle is to begin
Linked program: Permits the linking of up to 8 consecutive programs without the need of user intervention
100 programmable memories, with protection under password
Several acoustic and visual messages showing the situation of the device to the user

Easy to use

Microprocessor controlled, connectivity
Induction motor maintenance free (brushless)
Rotors and adapters list in memory
Noise level: below 60 dB
Start, stop, open lid and short spin with adjustable speed buttons
Possibility to block or modify the speed during the cycle
Last values remain in memory
Automatic rotor recognition, over-speed protection

Safety

Lid provided with security systems:
- Automatic lid lock system, motorized with double lock
- Emergency lid-lock release
- Locking and protection against opening along the run
- Lid dropping protection
- Port in the lid for calibration and operation checking
Unbalance detection and switch off
Protection safety ring between the centrifugation chamber and the housing
Chamber of centrifugation in stainless steel (easy cleaning)
Rotors can be removed with the lid closed
Rotors and adapters autoclavable, easy to install by the user
Automatic disconnection for energy saving up to 8 hours

Refrigerated model characteristics

Maintains the refrigeration after the centrifugation process
Precooling program with rotor spinning and selectable temperature
Guarantees 4 °C at maximum RPM
Temperature range from -20°C (-4°F) to 40°C (104°F) in 1°C/1°F steps, programmable
in °C o °F
Temperature sensor inside the chamber
Gas R 449A HFO (CFC free)

Standards of Consul 22 centrifuge

EU Directives: 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/EU, 98/79/EC
Standards: EN 61010-1, EN 61010-2-101, EN 61010-2-020, EN 61326-2-6, EN 61326-1

Standards of Consul 22 R refrigerated centrifuge

EU Directives: 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/EU, 98/79/EC.
Regulation n°: (EC) 1005/2009, (EU) 517/2014.
Standards: EN 61010-1, EN 61010-2-101, EN 61010-2-020, EN 61326-2-6, EN 61326-1

More information

Components

Standard system components

RT 286 SWING OUT Rotor, max. capacity 4x400 ml, RPM max. 4.000, radius 180 mm, RCF max. 3.220xg

Extend system with following add-ons

RT 285 SWING OUT Rotor, max. capacity 4x250 ml, RPM max. 4.200, radius 183 mm, RCF max. 3.609xg
RT 286 SWING OUT Rotor with hermetic lids RE 405, max. capacity 4x400 ml, RPM max. 4.000, radius 180 mm, RCF max. 3.220xg,
RT 288 SWING OUT Rotor, max. Capacity 12/8/4 microtiter, RPM max. 3.500, radius 149 mm, RCF max. 2.041 xg, Allows different configurations depending of the microplates height
RT 297 SWING OUT Rotor, max. Capacity 10/6/2/2 microtiter, RPM max. 4.500, radius 166 mm, RCF max. 3.758 xg. Allows different configurations depending of the microplates height. Only available for refrigerated models.
RT 280 ANGLE FIXED Rotor 45º, max. capacity 8x50 ml, RPM max. 6.000, radius 149 mm, RCF max. 5.997xg
RT 281 ANGLE FIXED Rotor 45º, max. capacity 4x100 ml, RPM max. 5.600, radius 138 mm, RCF max. 4.838xg
RT 282 ANGLE FIXED Rotor 30º, max. capacity 4x250 ml, RPM max. 4.700, radius 153 mm, RCF max. 3.779 xg
RT 292 ANGLE FIXED Rotor 30º, max. capacity 6x85 ml, RPM max. 9.000, radius 112 mm, RCF max. 10.142 xg
RT 287 ANGLE FIXED Rotor 45º, max. capacity 30x1,5-2 ml, RPM max. 14.300, radius 96 mm, RCF max. 21.948 xg

Download

Ortoalresa Consul 22 centrifuge series brochure EN

Download

Models

Product name
CE 226 Consul 22 centrifuge, 490W x 600D x 400H, 59 kg	Get quote
CE 226IVD Consul 22 IVD centrifuge, 490W x 600D x 400H, 59 kg	Get quote
CE 232 Consul 22 refrigerated centrifuge, 670W x 730D x 400H, 98 kg	Get quote
CE 232IVD Consul 22 R Refrigerated IVD centrifuge, 670W x 730D x 400H, 98 kg	Get quote