Ortoalresa
Dilitcen 22 R, refrigerated model
Code CE 221
The largest of our benchtop machines, with a capacity of up to 4 litres and an ergonomic design that enables easy loading of the rotor, as well as traceability of the positioning of the samples so as to balance the load and for easy identification. It has a wide range of accessories with capacity for four 1.000 ml. bottles, microplates, microtubes and a large number of positions for the most commonly used 15 ml. conical, 50 ml. conical, 15 ml., 10 ml. and 5 ml. tubes for clinical as well as biotechnology applications.
Its colour TFT touch screen offers performance that enables, in addition to controlling the equipment by operational parameters, the possibility of exporting data for analysis
and timer programmed operation. The autonomy provided by this equipment facilitates the automation of work cycles and modes. This also ensures traceability of the process, not leaving any parameter uncontrolled and maintaining the process at all times.
It has a refrigeration system that enables it to maintain the minimum temperature of the chamber below 4°C regardless of the type of rotor and the speed selected.
Read more about product
See other products in applications
Features
TFT color touch screen, visible from more than 3 m.:
- Shows RPM and RCF, time, temperature, acceleration/deceleration values (PCBS) and unbalance location system (ULS).
- Speed programming in 10 RPM/10 xg steps.
- Real RCF values on screen based on accessories configuration.
- Count up/down from “0” or at “set RPM/RCF” for reproducible tests.
- Timer from 1 sec to 99 hours programmable in 1 sec. steps and hold position.
- PCBS: Progressive controlled acceleration and braking system up to 175
- selectable ramps that prevents sample homogenization after separation.
- ULS: Unbalance location system indicating on the screen the number of the
- bucket which produces the unbalance switch off.
- Start delay: To program the time at which the cycle is to begin.
- Linked program: Permits the linking of up to 8 consecutive programs without the need of user intervention.
- 100 programmable memories, with protection under password.
- Several acoustic and visual notifications showing the device situation to the user.
Easy to use
- Microprocessor controlled. Connectivity.
- Induction motor maintenance free (brushless).
- Rotors and adapters list in memory.
- Noise level: below 60 dB.
- Start, stop, open lid and short spin with adjustable speed buttons.
- Possibility to block or modify the speed during the cycle.
- Last values remain in memory.
- Automatic rotor recognition. Over-speed protection.
Safety
- Lid provided with security systems:
- Automatic lid lock system, motorized with double lock.
- Emergency lid-lock release.
- Locking and protection against opening along the run.
- Lid dropping protection.
- Port in the lid for calibration and operation checking.
- Unbalance detection and switch off.
- Protection safety ring between the centrifugation chamber and the housing.
- Chamber of centrifugation in stainless steel (easy cleaning).
- Rotors can be removed with the lid closed. Hermetic lids.
- Rotors and adapters autoclavable, easy to install by the user.
- Automatic disconnection for energy saving up to 8 h, with deactivation option.
Refrigeration
- Maintains the refrigeration after the centrifugation process.
- Precooling program with rotor spinning and temperature selectable.
- Guarantees 4 °C at maximum RPM.
- Temperature range from -20°C (-4°F) to 40°C (104°F) in 1°C/1°F steps. Programmable in °C o °F.
- Temperature sensor inside the chamber.
- Gas R 449A HFO (CFC free).
More information on Ortoalresa website
Components
Standard system components
- RT 265 SWING OUT Rotor, max. capacity 4x1000 ml, RPM max. 4.000, radius 205 mm, RCF max. 3.667 xg
Extend system with following add-ons
- RT 265 SWING OUT Rotor with hermetic lids (RE 572), max. capacity 4x1000 ml, RPM max. 4.000, radius 205 mm, RCF max. 3.667 xg
- RT 279 SWING OUT Rotor, max. capacity 104x5 ml, RPM max. 3,800, radius 160 mm, RCF max. 2.583 xg. Available RT 301 for 104 x 7/10 ml. bs and 10 m.
- RT 278 SWING OUT Rotor, max. capacity 4x250 ml, RPM max. 4,200, radius 202 mm, RCF max. 3.984 xg
- RT 299 SWING OUT Rotor, max. capacity 6x250 ml, RPM max. 2,500, radius 212 mm, RCF max. 1.481 xg.
- RT 277 SWING OUT Rotor, max. capacity 4x750 ml, RPM max. 3.700, radius 204 mm, RCF max. 3.122 xg, This rotor can be supplied with hermetic lids (RE 356). Allows different configurations depending on the microplates height.
- RT 284 SWING OUT Rotor, max. capacity 12/8/4 microtiter, RPM max. 3,700, radius 182 mm, RCF max. 2.786 xg. Allows different configurations depending on the microplates height.
- RT 297 SWING OUT Rotor, max. capacity 10/6/2/2 microtiter, RPM max. 4,500, radius 166 mm, RCF max. 3.758 xg. Allows different configurations depending on the microplates height. Only available for refrigerated models
- RT 283 SWING OUT Rotor, max. capacity 4x750 ml / 4 blood bags, RPM max. 3.700, radius 204 mm, RCF max. 3.122 xg. This rotor can fit adapters for blood bags (RE 308). This rotor can be supplied with hermetic lids (RE 356). Allows different configurations depending on the microplates height.
- RT 280 ANGLE FIXED 45º Rotor, max. capacity 8x50 ml, RPM max. 6.000, radius 149 mm, RCF max. 5.997 xg
- RT 281 ANGLE FIXED 45º Rotor, max. capacity 4x100 ml, RPM max. 5.600, radius 138 mm, RCF max. 4.838 xg
- RT 282 ANGLE FIXED 30º Rotor, max. capacity 4x250 ml, RPM max. 4.700, radius 153 mm, RCF max. 3.779 xg
- RT 287 ANGLE FIXED 45º Rotor, max. capacity 30x1,5-2 ml, RPM max. 14.300, radius 96 mm, RCF max. 21.948 xg
- RT 292 ANGLE FIXED 30º Rotor, max. capacity 6x85 ml, RPM max. 9.000, radius 112 mm, RCF max. 10.142 xg
Related products
