Cage and Rack Washer AC-8000 - Steelco

Cage and Rack Washer AC-8000 - Steelco

Manufacturer: 

The AC 8000 series cage and rack washer is a heavy duty, large capacity, hydro-spray, steam heated washer specifically designed to support the throughput of medium and large size facilities. 

Add to quote request
  • Description
  • Related products

Cage and Rack Washer AC-8000 - Steelco

The AC 8000 series cage and rack washer is a heavy duty, large capacity, hydro-spray, steam heated washer specifically designed to support the throughput of medium and large size facilities. 

 AC 8000 is standard equipped with two pre heating water tanks and two dosage units. This results in greater flexibility in cycle development and may include a pre-wash followed by a standard wash, or a sequence of different chemicals wash phases. 

The rinse circuit is totally separate from the wash line. Multiple oscillating spray patterns guarantee a complete and continuous coverage of the load and the chamber providing excellent wash results in a short cycle time. 


AC 8000 cage and rack washer features sliding doors, operator multi language touch screen control with auto diagnostic checking that constantly monitors and displays current status. 

AC 8000 air-tight chamber allows the machine to be used not only for wash but also as:

•    Hydrogen Peroxide/Chlorine Dioxide decontamination pass-through chamber;
•    Chemical fogging chamber when fitted with a circuit of atomizer spraying disinfectant and compressed air within the chamber;
•    Thermal disinfection (clean steam) chamber;

AC 8000 can be manufactured following GMP requirements including FAT/SAT/IQ/OQ protocols.

Available in two washing chamber depth dimensions: AC 8000/2 (2250mm 88.58”) and AC 8000/3 (3000mm 118.11”), both in single or double interlocked sliding door(s). 
Standard doors are made of stainless steel AISI 316L with glass inspection windows, as option, in the full glass door. 

Dimensions: 

AC8000/2 
Overall Dimension WxDxH:2500mm (98.4”) x 2550mm (100.4”) x2465mm (97.0”) 
Chamber Depth: 2250mm (88.6”) 
Door passage: WxH: 1000mm (39.4”)  x 
2100mm(82.7”) 
AC8000/3  
Overall Dimension WxDxH: 2500mm (98.4”) x 3300mm (129.9”) x2465mm (97.0”) 
Chamber Depth: 3000mm (118.1”) 
Door passage: WxH: 1000mm (39.4”) x 2100mm 
(82.7) 


Cycles: 

Up to 65 washing/disinfection programs:  
10 pre-programmed, 50 user defined, 5 service 
Dosing Unit: 
Two automatic chemical dosing via peristaltic pumps with flow meter for the process control and the floating switch to check the chemical level in the drums.  


Sound level: 

< 80 dB (A) 

Sliding door:

•    Stainless steel AISI 316L (DIN 1.4404) washing chamber side, stainless steel AISI 304 external side with inspection windows or full HST glass door
•    Fully insulated to reduce heat loss and noise.
•    Interlocked doors (double door pass through version).

Washing chamber:

•    The chamber is made entirely of mirrored finished Ra<30µin (Ra<0.8µm) stainless steel AISI 316L (DIN 1.4404) (thickness 2 mm).
•    Designed and constructed with smooth edges and corners thus removing areas where dirt can accumulate and allow bacterial growth.

Insulation:

  • High performance melamine insulation 15mm (0.6”) thick guards against heat loss and reduces noise level.

Chamber floor:

The loading floor is made of AISI 316 stainless steel and composed by sections that can be easily lifted to reach the bottom of the washing chamber for cleaning and filter maintenance 

•    The loading floor is equipped with adjustable rail guides to match the client cart and racks castor lay out
•    User friendly hook to remove the floor panels for maintenance

Washing system:

Separated washing and rinsing circuits with spray nozzles to grant full washing chamber/load coverage. 

•    Washing spray nozzles are installed on multiple horizontally mounted oscillating pipes on the two sides of the wash chamber and on multiple fixed pipes on the ceiling of the wash chamber.
•    Washing pipes spray nozzles:
o    Stainless steel washing spray nozzles with plastic screw caps and plastic holders. (full stainless steel nozzles available as option)
o    AC 8000/2: 78 on each side and 16 on the ceiling (172 total wash nozzles)
o    AC 8000/3: 108 on each side and 20 on the ceiling (236 total wash nozzles)
•    Rinsing spray nozzles are installed on multiple horizontally mounted oscillating pipes on the two sides of the wash chamber.
•    Rinsing pipes spray nozzles:
o    Plastic rinsing spray nozzles with plastic screw caps and plastic holders. (full stainless steel nozzles available as option)
o    AC 8000/2: 42 on each side (84 total rinse nozzles)
o    AC 8000/3: 54 on each side (108 total rinse nozzles)

•    Easily disassembled spraying nozzles for cleaning and maintenance.
•    Water saving cycle by recirculation of water in the wash phase
•    High water pressure for outstanding washing results

Add to request
Manufacturer:
Cage and rack washers AC 7000 - Steelco
Add to request
Manufacturer:
Feeding bottles and animal cages washers Independent washing/rinsing system Multistage water filtering system, with self-cleaning filter AC 1400, single door and pass-through versions available High capacity cabinet for detergents Easy access to service
Add to request
Manufacturer:
Steelco AC 1400 is an efficient system able to wash all types of animal cages granting an easy maintenance of the cages cleanliness and effective cleaning results. Highest flexibility is granted by the compact design, which assures low cycle costs by reduced consumption of water and energy. The washer can be equipped with dedicated accessories for the optimized loading of animal cages and washing carts with injection systems for bottles. Washers dimensions: widht 1970 mm / 77.56"; depht 830 mm / 32.68"; height 1900 mm / 74.80"